Imprimir…
Refinar resultados Ordenado por

Sort Results

Vista lista Vista Extendida (Nueva)
SearchResultCount:"28"

Valore los resultados de su búsqueda

Product Image-HICHHI-579

Avantor® Hichrom Bottom-of-the-Bottle™, Inlet Solvent Filters

Descripción: These filters are made from 100% PEEK.
Numero del catalogo: HICHHI-579
UOM: 1 * 1 UN
Proveedor: Avantor
Product Image-HICHHI-583

Avantor® Hichrom, Inlet Solvent Filters

Descripción: These solvent inlet filters are used at the low pressure inlet side of the pump to help protect check valves, injector and column from particulate contamination from the eluent.
Numero del catalogo: HICHHI-583
UOM: 1 * 1 UN
Proveedor: Avantor
Product Image-590-0201

Suction filter, b.safe

Descripción: Filter candle made of porous PE.
Numero del catalogo: 590-0201
UOM: 1 * 10 UN
Proveedor: Bohlender
Product Image-554-7724

VWR® Hichrom Last Drop™ Inlet Filters

Descripción: The Last Drop™ eluent filter utilises a flat element, which sits parallel to the bottom of the reservoir, allowing the filter to draw all but the last 2% of the eluent without drawing air into the system. The filter consists of a 316 stainless steel or PTFE filter element in an inert housing.
Numero del catalogo: 554-7724
UOM: 1 * 1 UN
Proveedor: Avantor
Product Image-ROBU80052

Solvent filter

Descripción: This solvent filter is made of pure borosilicate glass.
Numero del catalogo: ROBU80052
UOM: 1 * 1 UN
Proveedor: ROBU GLASFILTER
Product Image-BOHLF765-48

Suction filters, BOLA

Descripción: These PTFE suction filters consist of a receiver with a female thread and an easily exchangeable frit. They are ideal prefilters in front of pump systems for protecting gaskets, pistons or column packings against premature wearing due to contaminations.
Numero del catalogo: BOHLF765-48
UOM: 1 * 1 UN
Proveedor: Bohlender
Product Image-ROBU18502

Vacuum-/gas distribution filters, VitraPOR®

Descripción: These filters are suitable for degassing and filtration of solvents e.g. in chromatography.
Numero del catalogo: ROBU18502
UOM: 1 * 1 UN
Proveedor: ROBU GLASFILTER
Product Image-590-0221

Suction filters with PTFE membrane, b.safe

Descripción: Suction Filter with PTFE membrane.
Numero del catalogo: 590-0221
UOM: 1 * 5 UN
Proveedor: Bohlender
Product Image-554-2127

Inlet filter, Rheodyne®

Descripción: Inlet filters are used to extract particles from the sample between the injector and the column.
Numero del catalogo: 554-2127
UOM: 1 * 5 UN
Proveedor: IDEX RHEODYNE
Product Image-VIVAH2O-CUF

Filter for ultrapure water system, arium® CellPlus

Descripción: The arium® CellPlus is a sterile packed, point-of-use ultrafilter for efficient removal of endotoxins, RNase, DNase, microorganisms and particles. Retrograde contamination is prevented by the protective bell design made up of polycarbonate. It offers high safety for critical cell culture applications.
Numero del catalogo: VIVAH2O-CUF
UOM: 1 * 1 UN
Proveedor: Sartorius
Image Unavailable-MICS58846-05

Mobile Phase Filters

Descripción: Biocompatible, last drop, PEEK and polypropylene mobile phase filters. PTFE filter element and will provide very high filter capacity and throughput while using a maximum amount of solvent. The unique design allows for this flat filter to vacuum up to the last drop of liquid in the reservoir bottle.
Numero del catalogo: MICS58846-05
UOM: 1 * 1 UN
Proveedor: MICROSOLV
Image Unavailable-PERCN2600070

Solvent spargers

Descripción: Solvent reservoir sparger, Acero inoxidable, Tamaño de poro: 40 µm
Numero del catalogo: PERCN2600070
UOM: 1 * 1 UN
Proveedor: PerkinElmer
Product Image-HEWL3150-0509

Solvent filter/degasser

Descripción: It prevents the formation of spurious peaks within the detector due to solvent outgassing at the low-pressure end of the chromatograph.
Numero del catalogo: HEWL3150-0509
UOM: 1 * 10 UN
Proveedor: Agilent
Product Image-REST25008

Low pressure slip-on inlet filter

Descripción: This slip-on inlet filter is made of 316 stainless steel tip with a tefzel collar seals to a corrosion-resistant 316 stainless steel filter element.
Numero del catalogo: REST25008
UOM: 1 * 1 UN
Proveedor: Restek
Image Unavailable-JOURJR-S-20009

Safety air inlet valves

Descripción: The air inlet valve has a check valve which blocks vapours of the solution in a bottle, preventing the vapours from escaping into the lab. The safety air outlet filter regulates the pressure during helium sparging.
Numero del catalogo: JOURJR-S-20009
UOM: 1 * 1 UN
Proveedor: VICI JOUR RESEARCH
Product Image-554-1123

Last drop filters/spargers

Descripción: The Last Drop filter/sparger combines filtration and sparging in a single unit. The PTFE housing contains a mobile phase filter with either a stainless steel or PTFE filter element. Connect the solvent line to the stepped connector, which accommodates 1,5, 2,2, and 3,5 mm ID tubing. A 1/4"-28 fitting connector connects a 1/8" helium line connects to the 10 µm sparger. Both connectors are PEEK.
Numero del catalogo: 554-1123
UOM: 1 * 1 UN
Proveedor: VICI JOUR RESEARCH
273 - 28 of 28