Esta buscando: Mascarillas reutilizables

Designed to achieve spectral line source requirements, the hollow cathode lamps (HCL) permit the intense emission of resonance lines, narrow line width for maximum sensitivity and linearity, minimal spectral interference from continuum emission, and rapid warm-up to produce stable, long-term light emission. Used primarily in physics and chemistry applications, these inert gas based light sources support atomic absorption spectrometers and lasers for frequency tuning. Operating without noise, the hollow cathode lamps feature hermetically sealed glass that fills cleanly with gas. Select models with single element lamps and multi elements are available.

Designed to achieve spectral line source requirements, the hollow cathode lamps (HCL) permit the intense emission of resonance lines, narrow line width for maximum sensitivity and linearity, minimal spectral interference from continuum emission, and rapid warm-up to produce stable, long-term light emission. Used primarily in physics and chemistry applications, these inert gas based light sources support atomic absorption spectrometers and lasers for frequency tuning. Operating without noise, the hollow cathode lamps feature hermetically sealed glass that fills cleanly with gas. Select models with single element lamps and multi elements are available.


5  results were found

Sort Results

SearchResultCount:"5"
Descripción: LDPE, translucent with white PP swivel dispensing closure.
Numero del catalogo: 215-1466
UOM: 1 * 5 UN
Proveedor: SciLabware


Descripción: LDPE, translucent, with PP spray cap.
Numero del catalogo: 215-3792
UOM: 1 * 5 UN
Proveedor: SciLabware


Descripción: LDPE, translucent.
Numero del catalogo: 215-0488
UOM: 1 * 10 UN
Proveedor: SciLabware


Descripción: PP, high clarity, rigid with PP screw caps.
Numero del catalogo: 215-0392
UOM: 1 * 10 UN
Proveedor: SciLabware


Descripción: High temp red screw cap, made of PBT, for media-lab bottle.
Numero del catalogo: BIBB4526/25D
UOM: 1 * 10 UN
Proveedor: SciLabware


Descripción: LDPE translucent, colour coded PP closure with jet-tip aperture.
Numero del catalogo: 215-4052
UOM: 1 * 5 UN
Proveedor: SciLabware


Descripción: PP, translucent.
Numero del catalogo: AZLOFDE544
UOM: 1 * 1 UN
Proveedor: SciLabware


Descripción: PYREX®, borosilicate glass with phenolic screw caps.
Numero del catalogo: BIBB1515/22D
UOM: 1 * 5 UN
Proveedor: SciLabware


Descripción: POM, coloured. Polyacetal clips for retaining glassware having Quickfit® conical joints.
Numero del catalogo: 201-8570
UOM: 1 * 10 UN
Proveedor: SciLabware


Descripción: Vasos de precipitados resistentes, vidrio de borosilicato PYREX®. Mecánicamente más fuerte que los vasos de precipitados estándar. Diseñado para una vida más larga y una mayor seguridad para el usuario.
Numero del catalogo: 213-0045
UOM: 1 * 12 UN
Proveedor: SciLabware


Descripción: Stirring rods with flattened end forming a paddle 20×9 mm at one end, and flattened smoothed top approximately 9 mm in diameter, which can be used to crush lumps.
Numero del catalogo: BIBBSRF380
UOM: 1 * 10 UN
Proveedor: SciLabware


Descripción: PYREX®, borosilicate glass, clear.
Numero del catalogo: 201-0227
UOM: 1 * 2 UN
Proveedor: SciLabware


Descripción: Screw cap, made of PP, for media-lab bottles
Numero del catalogo: BIBB4506/45F
UOM: 1 * 10 UN
Proveedor: SciLabware


Descripción: Phenolic cap with PTFE faced sealing disc
Numero del catalogo: BIBB4503/20
UOM: 1 * 20 UN
Proveedor: SciLabware


Descripción: PYREX®, borosilicate glass.
Numero del catalogo: 212-7416
UOM: 1 * 100 UN
Proveedor: SciLabware


Descripción: PYREX® ETFE.
Numero del catalogo: BIBB4536/32D
UOM: 1 * 10 UN
Proveedor: SciLabware


81 - 5 of 5