Imprimir…

Esta buscando: Pinzas

Steel and plastic forceps are provided with either straight or curved tips with a range of thickness for precise control. These tools are available in a variety of designs, lengths, and specific uses for laboratory procedures. Blunted tips allow for fine control and manipulation of small items where fingers would be too thick for effective use. Dissecting forceps feature curved blade and fine points whereas filter forceps are attached with non-slip finger grips. Most forceps are manufactured with durable and long-lasting stainless steel, designed for years of continuous use without signs of wear.

Steel and plastic forceps are provided with either straight or curved tips with a range of thickness for precise control. These tools are available in a variety of designs, lengths, and specific uses for laboratory procedures. Blunted tips allow for fine control and manipulation of small items where fingers would be too thick for effective use. Dissecting forceps feature curved blade and fine points whereas filter forceps are attached with non-slip finger grips. Most forceps are manufactured with durable and long-lasting stainless steel, designed for years of continuous use without signs of wear.


1 332  results were found

Refinar resultados Ordenado por

Sort Results

Vista lista Vista Extendida (Nueva)
SearchResultCount:"1332"

Valore los resultados de su búsqueda

Product Image-RSGA414.105

Pinzas, Coated forceps, Acero inoxidable, revestimiento de PFTE, Bent, serrated, Puntas: Pointed, 105 mm

Descripción: Pinzas, Coated forceps, Acero inoxidable, revestimiento de PFTE, Bent, serrated, Puntas: Pointed, 105 mm
Numero del catalogo: RSGA414.105
UOM: 1 * 5 UN
Proveedor: RSG
Product Image-RSGA014.105

Pinzas, Standard forceps, Acero inoxidable 18/10, Bent, serrated, Puntas: Pointed, 105 mm

Descripción: Pinzas, Standard forceps, Acero inoxidable 18/10, Bent, serrated, Puntas: Pointed, 105 mm
Numero del catalogo: RSGA014.105
UOM: 1 * 5 UN
Proveedor: RSG
Product Image-RSGA411.105

Pinzas, Coated forceps, Acero inoxidable, revestimiento de PFTE, Straight, serrated, Puntas: Blunt, 105 mm

Descripción: Pinzas, Coated forceps, Acero inoxidable, revestimiento de PFTE, Straight, serrated, Puntas: Blunt, 105 mm
Numero del catalogo: RSGA411.105
UOM: 1 * 5 UN
Proveedor: RSG
Product Image-RSGA416.110

Pinzas, Coated forceps, Acero inoxidable, revestimiento de PFTE, Straight, Puntas: Tower-tip, 110 mm

Descripción: Pinzas, Coated forceps, Acero inoxidable, revestimiento de PFTE, Straight, Puntas: Tower-tip, 110 mm
Numero del catalogo: RSGA416.110
UOM: 1 * 5 UN
Proveedor: RSG
Product Image-RSGA014.130

Pinzas, Standard forceps, Acero inoxidable 18/10, Bent, serrated, Puntas: Pointed, 130 mm

Descripción: Pinzas, Standard forceps, Acero inoxidable 18/10, Bent, serrated, Puntas: Pointed, 130 mm
Numero del catalogo: RSGA014.130
UOM: 1 * 5 UN
Proveedor: RSG
Product Image-OUTI43LB-4PEEK

Pinzas, Wafer tweezers, PEEK, Straight, serrated, 138 mm

Descripción: Pinzas, Wafer tweezers, PEEK, Straight, serrated, 138 mm
Numero del catalogo: OUTI43LB-4PEEK
UOM: 1 * 1 UN
Proveedor: OUTILS RUBIS
Product Image-OUTI43LB-8PEEK

Pinzas, Wafer tweezers, PEEK, Straight, serrated, 138 mm

Descripción: Pinzas, Wafer tweezers, PEEK, Straight, serrated, 138 mm
Numero del catalogo: OUTI43LB-8PEEK
UOM: 1 * 1 UN
Proveedor: OUTILS RUBIS
Product Image-USBE3033

Pinzas, Standard forceps, Acero inoxidable, Straight, serrated, Puntas: Pointed, 145 mm

Descripción: Pinzas, Standard forceps, Acero inoxidable, Straight, serrated, Puntas: Pointed, 145 mm
Numero del catalogo: USBE3033
UOM: 1 * 1 UN
Proveedor: USBECK Laborgeräte
Product Image-232-0096

Pinzas, Standard forceps, Latón niquelado, Straight, serrated, Puntas: Pointed, 130 mm

Descripción: Pinzas, Standard forceps, Latón niquelado, Straight, serrated, Puntas: Pointed, 130 mm
Numero del catalogo: 232-0096
UOM: 1 * 1 UN
Proveedor: USBECK Laborgeräte
Product Image-232-0210

Pinzas, Standard forceps, PBT, Straight, Puntas: Blunt, 120 mm

Descripción: Pinzas, Standard forceps, PBT, Straight, Puntas: Blunt, 120 mm
Numero del catalogo: 232-0210
UOM: 1 * 1 UN
Proveedor: OUTILS RUBIS
Product Image-232-0204

Pinzas, Standard forceps, PBT, Straight, Puntas: Very fine, 120 mm

Descripción: Pinzas, Standard forceps, PBT, Straight, Puntas: Very fine, 120 mm
Numero del catalogo: 232-0204
UOM: 1 * 1 UN
Proveedor: OUTILS RUBIS
Product Image-OUTI00-DURAX

Pinzas, Precision forceps, Durax™, Straight, Puntas: Very fine, 110 mm

Descripción: Pinzas, Precision forceps, Durax™, Straight, Puntas: Very fine, 110 mm
Numero del catalogo: OUTI00-DURAX
UOM: 1 * 1 UN
Proveedor: OUTILS RUBIS
Product Image-RSGA116.137

Pinzas, Precision forceps, Acero inoxidable, Bent, Puntas: Very fine, 120 mm

Descripción: Pinzas, Precision forceps, Acero inoxidable, Bent, Puntas: Very fine, 120 mm
Numero del catalogo: RSGA116.137
UOM: 1 * 5 UN
Proveedor: RSG
Product Image-232-0098

Pinzas, Standard forceps, Latón niquelado, Straight, serrated, Puntas: Pointed, 160 mm

Descripción: Pinzas, Standard forceps, Latón niquelado, Straight, serrated, Puntas: Pointed, 160 mm
Numero del catalogo: 232-0098
UOM: 1 * 1 UN
Proveedor: USBECK Laborgeräte
Product Image-232-1982

Pinzas, Coated forceps, Acero inoxidable, revestimiento de PFTE, Straight, serrated, 115 mm

Descripción: Pinzas, Coated forceps, Acero inoxidable, revestimiento de PFTE, Straight, serrated, 115 mm
Numero del catalogo: 232-1982
UOM: 1 * 1 UN
Proveedor: RSG
Product Image-232-1313

Pinzas, Standard forceps, PBT, Curved, Puntas: Hook-shaped, 120 mm

Descripción: Pinzas, Standard forceps, PBT, Curved, Puntas: Hook-shaped, 120 mm
Numero del catalogo: 232-1313
UOM: 1 * 1 UN
Proveedor: OUTILS RUBIS
193 - 208 of 1 332