Esta buscando: Sistemas de enlace y etiquetado de proteínas

Protein linking and labelling systems provide a convenient means for attaching fluorescent labels or biotins to antibodies and larger proteins. These kits are ideal for use with multiple applications, including flow cytometry, fluorescent microscopy, immunohistochemistry, primary detection, ELISAs, immunocytochemistry, and FISH. These systems are available with a variety of dye colours, biotin, fluorescent agents, and all the components needed to perform multiple conjugations and purifications. Protein labelling follows a simple protocol of reaction, separation, and then use.

Protein linking and labelling systems provide a convenient means for attaching fluorescent labels or biotins to antibodies and larger proteins. These kits are ideal for use with multiple applications, including flow cytometry, fluorescent microscopy, immunohistochemistry, primary detection, ELISAs, immunocytochemistry, and FISH. These systems are available with a variety of dye colours, biotin, fluorescent agents, and all the components needed to perform multiple conjugations and purifications. Protein labelling follows a simple protocol of reaction, separation, and then use.


374  results were found

SearchResultCount:"374"

Sort Results

Vista lista Vista Extendida (Nueva)

Valore los resultados de su búsqueda

Numero del catalogo: (AATB1278)
Proveedor: AAT BIOQUEST
Descripción: XFD647 is manufactured by AAT Bioquest, and it has the same chemical structure of Alexa Fluor® 647 (Alexa Fluor® is the trademark of ThermoFisher).
UOM: 1 * 100 µG


Numero del catalogo: (AATB1970)
Proveedor: AAT BIOQUEST
Descripción: ReadiLink™ xtra rapid antibody labelling kits require essentially only 2 simple mixing steps without a column purification needed.
UOM: 1 * 2 Tests


Nueva transparencia para los clientes europeos

¿Ha observado nuestra nueva visibilidad mejorada de la ubicación del stock en el paso de adquisición?

Más información

Mejora para las ubicaciones de stock

Numero del catalogo: (AATB5400)
Proveedor: AAT BIOQUEST
Descripción: ReadiLink™ Protein Conjugation Stop Buffer is used to stop the protein conjugation reactions that use succinimidyl ester, sulfonyl chloride or isothiocyanate.
UOM: 1 * 1 mL


Numero del catalogo: (AATB5520)
Proveedor: AAT BIOQUEST
Descripción: Biotin is widely used for labelling biomolecules, in particular, antibodies.
UOM: 1 * 2 Tests


Numero del catalogo: (AATB45205)
Proveedor: AAT BIOQUEST
Descripción: iFluor® 488 PSA kit is a much superior replacement for Alexa Fluor 488 tyramide-based kit or other spectrally similar fluorescent tyramide or TSA kits.
UOM: 1 * 100 Tests


Numero del catalogo: (AATB45220)
Proveedor: AAT BIOQUEST
Descripción: iFluor® 555 PSA kit is a much superior replacement for Alexa Fluor 555 tyramide-based kit or other spectrally similar fluorescent tyramide or TSA kits.
UOM: 1 * 100 Tests


Numero del catalogo: (AATB45240)
Proveedor: AAT BIOQUEST
Descripción: iFluor® 647 PSA kit is a much superior replacement for Alexa Fluor 647 tyramide-based kit or other spectrally similar fluorescent tyramide or TSA kits.
UOM: 1 * 100 Tests


Numero del catalogo: (AATB5365)
Proveedor: AAT BIOQUEST
Descripción: Our Buccutite™crosslinking technology provides the most convenient and effective crosslinking method to link two biomolecules with a high conjugation yield.
UOM: 1 * 2 µmol


Numero del catalogo: (AATB5372)
Proveedor: AAT BIOQUEST
Descripción: Buccutite™crosslinking technology provides the most convenient and effective crosslinking method to link two biomolecules with a high conjugation yield.
UOM: 1 * 2 µmol


Proveedor: AAT BIOQUEST
Descripción: The kit is optimised for efficient labelling and contains all the essential reagents required for efficient labelling of ssDNA or oligos.

Numero del catalogo: (AATB1255)
Proveedor: AAT BIOQUEST
Descripción: Although FITC is still the most popular fluorescent labelling dye for preparing green fluorescent bioconjugates, there are certain limitations with FITC, such as severe photobleaching for microscope imaging and pH-sensitive fluorescence.
UOM: 1 * 2 Tests


Numero del catalogo: (AATB1299)
Proveedor: AAT BIOQUEST
Descripción: FITC is still the most popular fluorescent labelling dye for preparing green fluorescent bioconjugates.
UOM: 1 * 2 Tests


Numero del catalogo: (AATB17310)
Proveedor: AAT BIOQUEST
Descripción: The kit provides Taq DNA polymerase enzyme, which incorporates iFluor® 488-dUTPs in the target DNA through Polymerase Chain Reaction (PCR).
UOM: 1 * 25 Tests


Proveedor: G-Biosciences
Descripción: FITC (fluorescein isothiocyanate) is a commonly used fluorescent label for proteins, as it contains the groups required for conjugating to amino, sulfhydryl, imidazoyl, tyrosyl or carbonyl groups of proteins. FITC has a molecular weight of 389, and excitation and emission wavelengths of 494 nm and 520 nm, respectively, therefore emitting green visible light.

Proveedor: Thermo Fisher Scientific
Descripción: Photoactivatable Biotin, Biotin-LC-ASA , Psoralen-PEG3-Biotin and TFPA-PEG3-Biotin each contain a photoactivatable group. When exposed to UV light, they become activated and insert non specifically into nearby molecules. These reagents may be used to label proteins and peptides, but they are also useful in labeling DNA, RNA and other molecules that do not contain any readily reactive functional groups. Psoralen-PEG3-Biotin contains a reactive psoralen group and is
designed to efficiently label nucleic acids. The psoralen group intercalates into the helix of DNA, allowing it to label efficiently and selectively. The psoralen can also stack along with the bases of single-stranded DNA or RNA increasing labeling efficiency and selectivity.

Proveedor: Thermo Fisher Scientific
Descripción: Carboxyl groups, in the form of carboxy termini, aspartate residues or glutamate residues, can be targeted for biotin labeling using amine-derivatised biotin molecules. This reaction is mediated by a class of crosslinkers known as carbodiimides and results in the formation of an amide bond. The reaction with EDC, the most common carbodiimide crosslinker, is generally performed in an MES buffer at pH 4,5 to 5 and requires just minutes to complete.

FDS

Consulta de precio
El stock para este material es limitada pero puede estar disponible en un almacén cerca de usted. Por favor, asegúrese de que ha iniciado sesión en la web para que el stock disponible se puede mostrar. Si el call sigue apareciendo y usted necesita ayuda, por favor llámenos al 902 222 897 o por email en webshop.es@avantorsciences.com.
El stock para este material es limitada pero puede estar disponible en un almacén cerca de usted. Por favor, asegúrese de que ha iniciado sesión en la web para que el stock disponible se puede mostrar. Si el call sigue apareciendo y usted necesita ayuda, por favor llámenos al 902 222 897 o por email en webshop.es@avantorsciences.com.
Este producto se trata de un artículo regulado sometido a normativa que restringe su venta. Si procede, nos pondremos en contacto con usted para solicitarle la licencia o declaración de uso necesaria para poder proceder al suministro del producto.
Este producto se trata de un artículo regulado sometido a normativa que restringe su venta.
Si procede, nos pondremos en contacto con usted para solicitarle la licencia o declaración de uso necesaria para poder proceder al suministro del producto.
Este producto ha sido bloqueado por su organización. Por favor, pónganse en contacto con su departamento de compras para obtener más información.
El producto original ya no está disponible. Su sustituto se muestra a continuación.
El producto(s) marcados con este símbolo están descatalogados - se venden hasta acabar stock. Pueden encontrar alternativas buscando con el número de catálogo VWR listado arriba. Si necesita más ayuda, por favor llame al Servicio de atención al cliente de VWR al 902.222.897.
225 - 240 of 374
no targeter for Bottom