Esta buscando: 3M


22 713  results were found

Sort Results

SearchResultCount:"22713"
Descripción: PTFE, white.
Numero del catalogo: BOHLJ1220-06
UOM: 1 * 1 UN
Proveedor: Bohlender


Descripción: PFA, transparent.
Numero del catalogo: BOHLA158-08
UOM: 1 * 1 UN
Proveedor: Bohlender


Descripción: El termopar en un tubo de acero inoxidable encapsulado en PTFE es ideal para la medición de la temperatura en líquidos agresivos y el cable proporciona una conexión flexible del dispositivo de medición al medio.
Numero del catalogo: BOHLP1860-25
UOM: 1 * 1 UN
Proveedor: Bohlender


Descripción: PTFE compound, glass shaft. These gastight stirrer heads are ideal for PTFE-jacketed stirrer shafts from BOLA and are also suitable for shortened stirrer shafts. Suitable for high speeds of up to 1500 min⁻¹.
Numero del catalogo: 442-0760
UOM: 1 * 1 UN
Proveedor: Bohlender


Descripción: Ideal for cutting plastic and rubber tubing with and without textile reinforcement.
Numero del catalogo: BOHLS1852-28
UOM: 1 * 1 UN
Proveedor: Bohlender


Descripción: PTFE, tall form.
Numero del catalogo: BOHLA164-12
UOM: 1 * 1 UN
Proveedor: Bohlender


Descripción: PTFE, con pico.
Numero del catalogo: BOHLA136-02
UOM: 1 * 1 UN
Proveedor: Bohlender


Descripción: Connector, screw thread coupling, made of PTFE. Two screw caps made of PPS or PBTP with GL thread and a PTFE/FPM gasket. The product is only exposed to PTFE.
Numero del catalogo: BOHLH901-01
UOM: 1 * 1 UN
Proveedor: Bohlender


Descripción: This vacuum adapter is made of PTFE with O-ring made of FKM for secure placement of standard filter cartridges made of glass or plastic on flasks with GL 45 thread.
Numero del catalogo: BOHLN1656-45
UOM: 1 * 1 UN
Proveedor: Bohlender


Descripción: Stirrer shafts made of PTFE-jacketed stainless steel and the impeller completely made of PTFE with two 45° angled blades.
Numero del catalogo: BOHLC379-06
UOM: 1 * 1 UN
Proveedor: Bohlender


Descripción: Precast tweezers made of PTFE.
Numero del catalogo: BOHLH909-06
UOM: 1 * 1 UN
Proveedor: Bohlender


Descripción: Stirrer shafts made of PTFE-jacketed stainless steel and the paddles made of PTFE.
Numero del catalogo: BOHLC380-04
UOM: 1 * 1 UN
Proveedor: Bohlender


Descripción: Centrifugal stirrer blades made of PTFE consisting of 2 paddles, bolt and clamp ring.
Numero del catalogo: BOHLC407-04
UOM: 1 * 1 UN
Proveedor: Bohlender


Descripción: Tube end fittings with male thread and PA washers.
Numero del catalogo: BOHLF702-04
UOM: 1 * 10 UN
Proveedor: Bohlender


Descripción: Bearing necks for receiving tandem magnetic stirring bar. The centre portion will fix to the vessel by means of glue such as silicone hardened in water.
Numero del catalogo: BOHLC364-16
UOM: 1 * 1 UN
Proveedor: Bohlender


Descripción: Stirrer blades made of PTFE, with one sided groove and 10 mm bore diameter.
Numero del catalogo: BOHLC402-24
UOM: 1 * 1 UN
Proveedor: Bohlender


753 - 768 of 22 713