Imprimir…

Esta buscando: LABCONCO


1 724  results were found

Refinar resultados Ordenado por

Sort Results

Vista lista Vista Extendida (Nueva)
SearchResultCount:"1724"

Valore los resultados de su búsqueda

Product Image-535-0230

Secador para congelación, FreeZone®

Descripción: Secador para congelación, FreeZone®
Numero del catalogo: 535-0230
UOM: 1 * 1 UN
Proveedor: LABCONCO
Product Image-LBCP5230400

Hard duct exhaust connector, Ø 15,2 cm, for connecting the glove box to ductwork attached to a remote blower (Requires ductwork and remote blower)

Descripción: Hard duct exhaust connector, Ø 15,2 cm, for connecting the glove box to ductwork attached to a remote blower (Requires ductwork and remote blower)
Numero del catalogo: LBCP5230400
UOM: 1 * 1 UN
Proveedor: LABCONCO
Product Image-135-1084

Thimble exhaust connector, Ø 15,2 cm, for connecting the glove box to ductwork attached to building exhaust, remote blower or FilterMate™ Portable Exhauster

Descripción: Thimble exhaust connector, Ø 15,2 cm, for connecting the glove box to ductwork attached to building exhaust, remote blower or FilterMate™ Portable Exhauster
Numero del catalogo: 135-1084
UOM: 1 * 1 UN
Proveedor: LABCONCO
Product Image-LBCP5225106

ULPA filter, 99,999% efficiency (Ø 0,12 micron particles), may be used in place of standard inlet or outlet HEPA filter, weight 3 kg

Descripción: ULPA filter, 99,999% efficiency (Ø 0,12 micron particles), may be used in place of standard inlet or outlet HEPA filter, weight 3 kg
Numero del catalogo: LBCP5225106
UOM: 1 * 1 UN
Proveedor: LABCONCO
Product Image-135-1083

Remote wall-mount blower kit, incl. epoxy-coated steel bracket, mounting hardware, hose, hose clamps and power cord extension for moving the integral blower from the glove box to a wall up to five feet away

Descripción: Remote wall-mount blower kit, incl. epoxy-coated steel bracket, mounting hardware, hose, hose clamps and power cord extension for moving the integral blower from the glove box to a wall up to five feet away
Numero del catalogo: 135-1083
UOM: 1 * 1 UN
Proveedor: LABCONCO
Product Image-LBCP5225105

Replacement inlet or outlet HEPA filter, 99,99% efficiency (Ø 0,3 micron particles), weight 3 kg

Descripción: Replacement inlet or outlet HEPA filter, 99,99% efficiency (Ø 0,3 micron particles), weight 3 kg
Numero del catalogo: LBCP5225105
UOM: 1 * 1 UN
Proveedor: LABCONCO
Product Image-LBCP5245800

Waste port incl. rubber stopper plug, provides a Ø 4,5" (11,4 cm) pass-through port to attach an external waste bag; requires Ø 6,16" drill hole, waste bags and bands (not included)

Descripción: Waste port incl. rubber stopper plug, provides a Ø 4,5" (11,4 cm) pass-through port to attach an external waste bag; requires Ø 6,16" drill hole, waste bags and bands (not included)
Numero del catalogo: LBCP5245800
UOM: 1 * 1 UN
Proveedor: LABCONCO
Product Image-135-1086

Recirculation kit, incl. hose, clamps and epoxy-coated steel adapter, allows the built-in blower exhaust to be connected to the inlet HEPA filter, providing total recirculation of air volume useful for dry atmosphere operations

Descripción: Recirculation kit, incl. hose, clamps and epoxy-coated steel adapter, allows the built-in blower exhaust to be connected to the inlet HEPA filter, providing total recirculation of air volume useful for dry atmosphere operations
Numero del catalogo: 135-1086
UOM: 1 * 1 KIT
Proveedor: LABCONCO
Product Image-LBCP5238100

Transfer chamber pressure gauge kit, incl. gauge, hose, mounting brackets, fittings and hardware; monitors pressure/vacuum from 0 to -29 inches of mercury (Requires Ø 0,562" drill hole in back of transfer chamber)

Descripción: Transfer chamber pressure gauge kit, incl. gauge, hose, mounting brackets, fittings and hardware; monitors pressure/vacuum from 0 to -29 inches of mercury (Requires Ø 0,562" drill hole in back of transfer chamber)
Numero del catalogo: LBCP5238100
UOM: 1 * 1 KIT
Proveedor: LABCONCO
Product Image-135-1087

Positive pressure conversion kit, incl. hose, two clamps and harness assembly, creates particulate cleanliness inside the box measured to ISO 14644-1 test method, achieving ISO Class 3 conditions

Descripción: Positive pressure conversion kit, incl. hose, two clamps and harness assembly, creates particulate cleanliness inside the box measured to ISO 14644-1 test method, achieving ISO Class 3 conditions
Numero del catalogo: 135-1087
UOM: 1 * 1 KIT
Proveedor: LABCONCO
Product Image-135-1089

Blower foot switch, incl. foot pedal and power cord; provides a hands-free means to temporarily shut off power when obtaining sensitive balance readings or manipulating fine powders

Descripción: Blower foot switch, incl. foot pedal and power cord; provides a hands-free means to temporarily shut off power when obtaining sensitive balance readings or manipulating fine powders
Numero del catalogo: 135-1089
UOM: 1 * 1 UN
Proveedor: LABCONCO
Product Image-LBCP5242400

DOP test kit for HEPA filters, incl. the connections, hoses and test procedure necessary to conduct a HEPA filter test on both the inlet and outlet filter

Descripción: DOP test kit for HEPA filters, incl. the connections, hoses and test procedure necessary to conduct a HEPA filter test on both the inlet and outlet filter
Numero del catalogo: LBCP5242400
UOM: 1 * 1 UN
Proveedor: LABCONCO
Product Image-LBCP5240800

Installation kit for mechanical or electrical straight pass-through kit, incl. drill bits for installing the mechanical or electrical pass-through

Descripción: Installation kit for mechanical or electrical straight pass-through kit, incl. drill bits for installing the mechanical or electrical pass-through
Numero del catalogo: LBCP5240800
UOM: 1 * 1 KIT
Proveedor: LABCONCO
Product Image-LBCP5241700

Bag set for bag-in/bag-out HEPA filter replacement, incl. two bags and two straps necessary for changing and disposing of one inlet or outlet filter

Descripción: Bag set for bag-in/bag-out HEPA filter replacement, incl. two bags and two straps necessary for changing and disposing of one inlet or outlet filter
Numero del catalogo: LBCP5241700
UOM: 1 * 1 UN
Proveedor: LABCONCO
Product Image-LBCP5240700

Mechanical or electrical pass-through kit, provides three pass-through ports with sealing ID ranges 0,230/0,395, 0,230/0,530 and 0,450/0,705, useful for sealing cords and plumbing (Requires installation and drill holes; installation kit 5240800 is recommended)

Descripción: Mechanical or electrical pass-through kit, provides three pass-through ports with sealing ID ranges 0,230/0,395, 0,230/0,530 and 0,450/0,705, useful for sealing cords and plumbing (Requires installation and drill holes; installation kit 5240800 is recommended)
Numero del catalogo: LBCP5240700
UOM: 1 * 1 UN
Proveedor: LABCONCO
Product Image-135-1090

Thimble exhaust connector, Ø 12,7 cm, for connecting the glove box to the FilterMate™ portable exhauster

Descripción: Thimble exhaust connector, Ø 12,7 cm, for connecting the glove box to the FilterMate™ portable exhauster
Numero del catalogo: 135-1090
UOM: 1 * 1 UN
Proveedor: LABCONCO
289 - 304 of 1 724