Esta buscando: LABCONCO

Proveedor: LABCONCO

Descripción: Solid epoxy work surface, flat, no cupsink cutout for 4 inch width hood, enclosures, glove boxes, 1220×760×30 mm, 61 kg

Proveedor: LABCONCO

Descripción: Moisture monitor (dew point measurements), 0 - 6000 ppm; incl. meter, probe, attachment plug, and calibration stand; for placement inside the glove box’s main chamber; 140×203×46 mm, 230 V, 50/60 Hz

Proveedor: LABCONCO

Descripción: These glove boxes provides a leak-tight environment to perform work with contamination-sensitive materials under vacuum or in an inert environment.

Proveedor: LABCONCO

Descripción: Guantes para cajas de guantes, Goma, blanco, Grosor: 0,015 gauge, Tamaño del guante: 8,5

Proveedor: LABCONCO

Descripción: Evaporator, centrifugal, Bloque de aluminio con recubrimiento de PTFE para 110 tubos de 12 mm de diámetro con altura máxima de 150 mm

Proveedor: LABCONCO

Descripción: FreeZone® console freeze dryers with or without stoppering tray dryers are designed for lyophilising moderate to large loads and stoppering vials or serum bottles under vacuum. The console features a front viewing window and interior space for a vacuum and accommodation for a full size tray dryer such as the FreeZone® stoppering tray dryer pump (sold separately).

Proveedor: LABCONCO

Descripción: Protector® work stations are specifically designed for the needs of pathologists and histotechnologists. Like a traditional fume hood, these enclosures have a front air foil and rear baffle to direct the inflow air across the work area and away from the operator. Ideal for cramped or crowded labs, protector work stations have a low profile so they fit easily under standard upper cabinets. Designed with a built-in blower which use specially treated carbon filters.

Numero del catalogo: (LBCP4882806)

Proveedor: LABCONCO

Descripción: Solid epoxy work surface, flat, no cupsink cutout, for 30 inch width laboratory hoods, 760×760×30 mm, 39 kg

UOM: 1 * 1 UN

Promoción

Numero del catalogo: (LBCP8019000)

Proveedor: LABCONCO

Descripción: Tranporting cart made of stainless steel with two removable polished type 304 stainless steel pans that are 51 mm deep on three sides with one open side for easy equipment transfer from countertop to cart holds a variety of laboratory supplies, equipment and miscellaneous containers.

UOM: 1 * 1 UN

Promoción

Proveedor: LABCONCO

Descripción: Clean benches provide product protection from environmental contaminants for applications requiring a particulate-free work area, including plant tissue culture, electronic part inspection, syringe filling, medical device assembly, media plate preparation, and PCR.

Proveedor: LABCONCO

Descripción: Epoxy-coated steel blower transition adapters fit all Labconco coated steel blowers.

Numero del catalogo: (LBCP7949030)

Proveedor: LABCONCO

Descripción: FreeZone® benchtop shell freezers provide a compact system for prefreezing samples for lyophilization.

UOM: 1 * 1 UN

Promoción

Numero del catalogo: (135-1096)

Proveedor: LABCONCO

Descripción: This HEPA-filtered glove box has inlet and outlet HEPA filters and provides a leak-tight physical barrier to protect the operator from hazardous airborne particulates and powders.

UOM: 1 * 1 UN

Promoción

Proveedor: LABCONCO

Descripción: Water purification accessory, Filter pack, includes twin cartridges

Proveedor: LABCONCO

Descripción: In nanoparticle manipulation and dry powder chemical handling, enclosures keep hazardous powders and particulates contained. Room air is pulled into the enclosure from the front, flows to the baffle, and finally passes through a ULPA exhaust filter (99,999% efficient on particles 0,12 μm in size) before returning to the laboratory or cleanroom.

Proveedor: LABCONCO

Descripción: Automatic pressure controller for 230 V units, incl. mounting bracket, hardware, 3/16" ID polyvinyl tubing, 3/32" ID polyvinyl tubing, and power cord, for automatic control of the main chamber pressure, main chamber purging and filling cycles, and transfer chamber evacuation and filling cycles