Esta buscando: Industrial Physics

Proveedor: Industrial Physics

Descripción: The PosiTest DFT measure coatings on all metals - The DFT Fe measures non-magnetic coatings on steel while the DFT Combo measures both non magnetic coatings on steel and non conductive coatings on aluminum and brass.

Proveedor: Industrial Physics

Descripción: Durómetro, Weight set, 4 kg, for Durometer shore D

Proveedor: Industrial Physics

Descripción: Plastic (or aluminium) thickness combs to be used as a record of wet film thickness measurements, in 30 steps.

Proveedor: Industrial Physics

Descripción: RAL 840-HR are the basic collection for matt colour shades and RAL 841-GL for glossy colour shades. Contains safety and signalling colours with the colour requirements of DIN regulations.

Numero del catalogo: (SIMESP1560)

Proveedor: Industrial Physics

Descripción: Combination gauge equipped with two different tips: Sharp needle for surface roughness and round tip for coating thickness.

UOM: 1 * 1 UN

Promoción

Numero del catalogo: (SIMELI0010)

Proveedor: Industrial Physics

Descripción: The MaxiLigno are equipped with the latest technology for precision and easy handling.

UOM: 1 * 1 UN

Promoción

Numero del catalogo: (SIMELD3059)

Proveedor: Industrial Physics

Descripción: This pictorial standard shows two uncoated, rusted steel surfaces (Conditions C and D) before and after wet abrasive blast cleaning. Photographs illustrate two degrees of cleaning (WAB 6 and WAB 10) for each initial condition with additional photos that depict the appearance of light, moderate, and heavy flash rust after cleaning. Also contains a written guide to the use of reference photographs and additional explanatory notes. Cleanliness requirements for conditions depicted are defined by the joint SSPC/NACE surface preparation specifications for commercial (SP 6/NACE 3) and near-white blast cleaning (SP 10/NACE 2). Photos of commercial and near white surfaces achieved by dry abrasive blast cleaning can be found in SSPC-VIS 1.

UOM: 1 * 1 UN

Promoción

Numero del catalogo: (SIMELD0560)

Proveedor: Industrial Physics

Descripción: This densimeter is designed to perform automatic calculation of density and compensation of water temperature.

UOM: 1 * 1 UN

Promoción

Proveedor: Industrial Physics

Descripción: These cylindrical bend testers are used to determine the elasticity, adhesion and elongation of paint on metal.

Proveedor: Industrial Physics

Descripción: Stainless steel spiral applicators with a film width of 320 mm are round bars tightly wound with stainless steel wire. The diameter of the wire, in wound form, regulates the thickness of the coating.

Proveedor: Industrial Physics

Descripción: Accessories for washability tester, Universal clamp holder

Proveedor: Industrial Physics

Descripción: The temperature control jacket for viscosity cups is a double jacketed casing of anodised aluminium with built-in spirit level to bring the viscosity beaker to the required temperature with cooled and heated liquids.

Numero del catalogo: (SIMEDV5002)

Proveedor: Industrial Physics

Descripción: Accessory for coating tester, Stand for immersed body

UOM: 1 * 1 UN

Promoción

Numero del catalogo: (SIMETB0165)

Proveedor: Industrial Physics

Descripción: This linear wear resistance tester is designed to test virtually any size or shape specimen. Ideal for testing material properties of contoured surfaces and finished products.

UOM: 1 * 1 UN

Promoción

Numero del catalogo: (SIMETB2000)

Proveedor: Industrial Physics

Descripción: Using interchangeable tools, this shear / scratch tester is used to measure the susceptibility of material surfaces to scratching, marring, shearing, gouging, scraping, engraving, and other similar physical damage not classified as ordinary wear.

UOM: 1 * 1 UN

Promoción

Numero del catalogo: (SIMELI7000)

Proveedor: Industrial Physics

Descripción: Non destructive instrument for measuring moisture levels in wood.

UOM: 1 * 1 UN

Promoción