Esta buscando: UPCHURCH SCIENTIFIC

Proveedor: UPCHURCH SCIENTIFIC

Descripción: Upchurch Scientific®, 1583 Adapter, 10-32 coned, female to 1/4-28 flat-bottom, female, 1 mm thru-hole, 0,60 µl swept volume, Acero inoxidable

Proveedor: UPCHURCH SCIENTIFIC

Descripción: Stop a flow stream quickly with these shut-off valves. The bodies are manufactured from either PEEK or ETFE. Both versions feature a PCTFE rotor, making them highly resistant to chemicals. The blue colorant used in some valve configurations has proven not to leach out with common HPLC solvents.

Proveedor: UPCHURCH SCIENTIFIC

Descripción: These ultra-low volume back pressure regulators (BPRs) are developed to minimise swept volume, which is especially important for multi-detector applications.

Proveedor: UPCHURCH SCIENTIFIC

Descripción: Upchurch Scientific®, A-420 frit, Porosidad: 2,0 µm, Grosor: 1,57 mm, Frit Ø ext.: 3,2 mm, Sinterizado, el volumen: 3,0 µl, Materiales sinterizados: Acero inoxidable, Anillo Ø ext.: 5,08 mm, Material anillo: PCTFE

Proveedor: UPCHURCH SCIENTIFIC

Descripción: Stainless steel, PEEK or UHMWPE

Proveedor: UPCHURCH SCIENTIFIC

Descripción: PEEK.

Proveedor: UPCHURCH SCIENTIFIC

Descripción: These adapters are made from PEEK or stainless steel. They create a true zero dead volume (ZDV) connection between ¹/₁₆" ext. Ø tubing and capillary tubing.

Proveedor: UPCHURCH SCIENTIFIC

Descripción: Upchurch Scientific®, P-133, replacement flangeless ferrule, ETFE blue, 5/16-24 flat bottom port, 500 psi, for 3/16" OD tubing, ETFE

Proveedor: UPCHURCH SCIENTIFIC

Descripción: These standard inline check valves are made from gold plated stainless steel.

Proveedor: UPCHURCH SCIENTIFIC

Descripción: <B>Nota</B>: no utilizar conexiones metálicas en puertos de plástico, ya que se podrían dañar.

Proveedor: UPCHURCH SCIENTIFIC

Descripción: PEEK or FEP.

Proveedor: UPCHURCH SCIENTIFIC

Descripción: These adapters are made from PEEK or PCTFE.

Proveedor: UPCHURCH SCIENTIFIC

Descripción: Upchurch Scientific®, VHP torque wrench, Par de apriete: 1,13 N-m, Utilizar con tipo de cabezal: 1/4" hex

Numero del catalogo: (554-3024)

Proveedor: UPCHURCH SCIENTIFIC

Descripción: Designed to cut polymer tubing ¹/₁₆" and ¹/₈" O.D.

UOM: 1 * 1 UN

Promoción

Numero del catalogo: (UPCHP-780)

Proveedor: UPCHURCH SCIENTIFIC

Descripción: Use this tubing expanding awl when working with barbed fittings. Sometimes the tubing can be too tight to fit over the barb properly. This awl can also be used with semi-rigid tubing, for those rare applications where this tubing needs to be paired with a barbed fitting. By expanding the int.Ø of the tubing, it will make it an easier process to insert the barbed fitting into place.

UOM: 1 * 1 UN

Promoción

Proveedor: UPCHURCH SCIENTIFIC

Descripción: Stainless steel tubing.