Esta buscando: Filtros+centr\u00EDfugos


12 921  results were found

SearchResultCount:"12921"

Sort Results

Vista lista Vista Extendida (Nueva)

Valore los resultados de su búsqueda

Proveedor: LABCONCO
Descripción: XPert™ balance enclosures provide user protection by keeping powders, particulates and fume contained during weighing procedures. They are well suited for pharmaceutical research and other laboratory applications involving weighing of toxic substances. These vented balance safety enclosures may be ducted to the outside or connected to the FilterMate Portable Exhauster to be exhausted back into the laboratory through HEPA filters.

Proveedor: Sartorius
Descripción: Minisart® NML with surfactant-free cellulose acetate (SFCA) is the best choice for all aqueous solutions and oils with a pH of 4 - 8. With a pore size of 0,2 µm that can be used for sterile filtration and has a male luer lock outlet. Only available in the EU/EEA and registered countries

Proveedor: Cytiva (Formerly Pall Lab)
Descripción: Inherently low ash membrane ideally suited for multiple NIOSH analytical methods.
Proveedor: Syngene (a division of the Synoptics group)
Descripción: Syngene, Selector de paso corto para 3 o 7 posiciones, Para: Gel documentation systems G:box mini

Proveedor: Thermo Fisher Scientific
Descripción: Integral filter made from water-repellent PE which does not swell on accidental penetration by liquid, allowing recovery of the sample. Protect pipettes and the samples from contamination with Thermo Scientific™ Finntip™ Filtered Pipette Tips. These sterile, disposable pipette tips keep pipettes clean, and are perfect for PCR amplification applications and for pipetting radioactive, infectious, and aerosol-emitting samples. Available in racks with a wide volume range of 0,2 μl to 10 ml.

Environmentally Preferable Promoción

Proveedor: Sartorius
Descripción: These filter tips have more space between the sample and the filter than conventional filter tips. This virtually eliminates the risk of an expensive or a contagious sample permeating the filter.
Numero del catalogo: (MILF14112AM)
Proveedor: Merck
Descripción: Ultrafiltration membranes - Amicon™ XM polyacrylonitrile/PVC co-polymer filters. High-recovery membranes for stirred cells.
UOM: 1 * 10 UN


Proveedor: Whatman products (Cytiva)
Descripción: Cytiva's Polydisc GW (Ground Water) is an in-line filter specifically designed for preparation of ground water samples for dissolved heavy metal analysis.

Proveedor: Sartorius
Descripción: Vivaspin® concentrators are disposable ultrafiltration devices for the concentration of biological samples of 0,4 to 2 ml.

Proveedor: MACHEREY-NAGEL
Descripción: MN 619 is a dense filter paper with very high particle retention and slow flow rate. Excellent clarifying capacity for cloudy suspensions and for water and soil analysis.

Numero del catalogo: (MILFSLGSVR255F)
Proveedor: Merck
Descripción: Vented Millex®-GS filter units are syringe filters for sterilisation of low volume aqueous solutions where venting is desired.
UOM: 1 * 50 UN


Proveedor: VWR Collection
Descripción: Al utilizar el método de desplazamiento directo, estas puntas funcionan bien para líquidos infecciosos y volátiles, ya que el fluido nunca entrará en contacto con el instrumento, lo que evita cualquier contaminación.

Proveedor: Merck
Descripción: These centrifugal filters are disposable ultrafiltration non sterile devices used for purifying, concentrating, and desalting biological samples in the 2 to 15 ml volume range.

Proveedor: LABCONCO
Descripción: In nanoparticle manipulation and dry powder chemical handling, enclosures keep hazardous powders and particulates contained. Room air is pulled into the enclosure from the front, flows to the baffle, and finally passes through a ULPA exhaust filter (99,999% efficient on particles 0,12 μm in size) before returning to the laboratory or cleanroom.

Proveedor: VWR Collection
Descripción: Filter vials with the membrane, PE snap ring cap (11 mm), with hole and silicone white/PTFE red septa.

Numero del catalogo: (531-1417)
Proveedor: VWR Collection
Descripción: Regulador de vacío/trampa de humedad, VWR®, Para: Rotavapores LCD/LED
UOM: 1 * 1 UN


Consulta de precio
El stock para este material es limitada pero puede estar disponible en un almacén cerca de usted. Por favor, asegúrese de que ha iniciado sesión en la web para que el stock disponible se puede mostrar. Si el call sigue apareciendo y usted necesita ayuda, por favor llámenos al 902 222 897 o por email en webshop.es@avantorsciences.com.
El stock para este material es limitada pero puede estar disponible en un almacén cerca de usted. Por favor, asegúrese de que ha iniciado sesión en la web para que el stock disponible se puede mostrar. Si el call sigue apareciendo y usted necesita ayuda, por favor llámenos al 902 222 897 o por email en webshop.es@avantorsciences.com.
Este producto se trata de un artículo regulado sometido a normativa que restringe su venta. Si procede, nos pondremos en contacto con usted para solicitarle la licencia o declaración de uso necesaria para poder proceder al suministro del producto.
Este producto se trata de un artículo regulado sometido a normativa que restringe su venta.
Si procede, nos pondremos en contacto con usted para solicitarle la licencia o declaración de uso necesaria para poder proceder al suministro del producto.
Este producto ha sido bloqueado por su organización. Por favor, pónganse en contacto con su departamento de compras para obtener más información.
El producto original ya no está disponible. Su sustituto se muestra a continuación.
El producto(s) marcados con este símbolo están descatalogados - se venden hasta acabar stock. Pueden encontrar alternativas buscando con el número de catálogo VWR listado arriba. Si necesita más ayuda, por favor llame al Servicio de atención al cliente de VWR al 902.222.897.
769 - 784 of 12 921
no targeter for Bottom