Esta buscando: Cabezas+de+bombas+de+pistón


125 287  results were found

SearchResultCount:"125287"

Sort Results

Vista lista Vista Extendida (Nueva)

Valore los resultados de su búsqueda

Proveedor: HAMILTON BONADUZ
Descripción: Suitable for applications such as GC, TLC and micro pipetting. Manufactured according to the principle of dead volume by positive pressure. A tungsten piston is introduced into the syringe as far as the tip of the needle. Needle and piston are calibrated against each other and must be changed at the same time in the event of replacement.

Proveedor: Agilent
Descripción: CrossLab, Replacement needle and plunger repair kit for 0,5 µl plunger-in-needle syringe

Proveedor: IKA
Descripción: The high pressure homogeniser HPH is an inline dispersing machine for energy-efficient, continuous production of superfine emulsions. Compared to other IKA inline machines, the dispersing action of the high pressure homogeniser HPH is not based on the rotor/stator principle. The improved homogenising effect is achieved within the homogeniser by means of spontaneous decompression of the liquid from max. 2000 bar to an ambient pressure. With the same energy input, the IKA HPH produces considerably finer emulsions than conventional toothed ring dispersers. The use of high pressure homogenisers is recommended when a disintegration down to the nano range is required; however, these machines do achieve a smaller flow capacity than conventional dispersers. The high pressure homogeniser consists of a high pressure piston pump and a downstream homogenising valve. The pressure build-up within the HPH occurs by means of one or more piston pump(s) which, with the help of ceramic pistons, ensure(s) a volume flow that is independent of pressure and virtually pulsation free. The desired homogenising pressure can be infinitely adjusted. The pressure is reduced in a selected adjustable gap of the homogenizing valve. The quick pressure decrease in a moving medium leads to extremely high turbulences and cavitations, which then bring about the grinding of the raw product. The machine's design can be adapted to fit customer-specific tasks. The high pressure homogeniser is available in two sizes with either one or more piston(s) of varying Ø. These parameters determine the max. homogenising pressure (800 or 2000 bar) possible for a specific machine type, the minimal permitted feeding volume (up to 10 ml) as well as homogenising results and flow capacities.

Proveedor: BURKLE
Descripción: El tubo sifónico extraíble se adapta a la altura del recipiente al utilizar la bomba de pedal. De este modo se garantiza un buen vaciado y la bomba de pedal se puede emplear para diferentes recipientes.

Proveedor: KNF
Descripción: Simple, user-friendly compact dosing pump.
Application: Metering liquids.

Proveedor: BURKLE
Descripción: ViscoSampler with powerful suction for viscous media. The media is drawn up and discharged using the suction flask.

Proveedor: SCIENCIX
Descripción: Replacement parts for OEMs such as Agilent, Shimadzu and Waters chromotograpy systems. Sciencix parts are equivalent to the corresponding OEM part.

Proveedor: BURKLE
Descripción: Bomba para disolventes con accionamiento de pedal para el trasiego de líquidos de gran pureza como p. ej. disolventes. Todas las piezas que entran en contacto con el medio están fabricadas en acero inoxidable (1.4301) y PTFE.

Proveedor: BURKLE
Descripción: Bomba de diafragma, Mini airjet fine regulation head

Proveedor: Agilent
Descripción: Seal pack rebuild kit with needle

Numero del catalogo: (471-1238)
Proveedor: Stirling Ultracold
Descripción: Ultra-low temperature freezer featuring the free-piston Stirling engine. This next generation of environmentally sustainable ULT freezers achieve stable storage conditions over a wide temperature range. The freezer uses 70 to 75% less energy than standard compressor-based ULT freezers, with the industry's best ultra-low cooling performance.
UOM: 1 * 1 UN


Proveedor: Trajan Scientific and Medical
Descripción: Guaranteed liquid and gas tight to 3,5 bar. The plunger extends into the needle tip. Ideal for dispensing very small liquid volumes.

Numero del catalogo: (181-0251)
Proveedor: VWR Collection
Descripción: Cabezal de bomba apilable FASTLoad
UOM: 1 * 1 UN


Proveedor: Trajan Scientific and Medical
Descripción: P25-MS1 plunger, 25 µl

Proveedor: SPECTRUM LABORATORIES
Descripción: Disposable tubes for liquid and solid samples with one hand. The sample to be transfered is inserted with harvester and discharged using the plunger.

Numero del catalogo: (710-0557)
Proveedor: Texwipe
Descripción: Bastoncillos para limpieza fabricados con filamentos continuos de poliéster 100%, sellados en el mango por fundición en caliente. De este modo se sellan los cantos descubiertos para minimizar el desprendimiento de fibras y evitar el uso de pegamento contaminantes.
UOM: 1 * 2.500 UN

Certificados


Consulta de precio
El stock para este material es limitada pero puede estar disponible en un almacén cerca de usted. Por favor, asegúrese de que ha iniciado sesión en la web para que el stock disponible se puede mostrar. Si el call sigue apareciendo y usted necesita ayuda, por favor llámenos al 902 222 897 o por email en webshop.es@avantorsciences.com.
El stock para este material es limitada pero puede estar disponible en un almacén cerca de usted. Por favor, asegúrese de que ha iniciado sesión en la web para que el stock disponible se puede mostrar. Si el call sigue apareciendo y usted necesita ayuda, por favor llámenos al 902 222 897 o por email en webshop.es@avantorsciences.com.
Este producto se trata de un artículo regulado sometido a normativa que restringe su venta. Si procede, nos pondremos en contacto con usted para solicitarle la licencia o declaración de uso necesaria para poder proceder al suministro del producto.
Este producto se trata de un artículo regulado sometido a normativa que restringe su venta.
Si procede, nos pondremos en contacto con usted para solicitarle la licencia o declaración de uso necesaria para poder proceder al suministro del producto.
Este producto ha sido bloqueado por su organización. Por favor, pónganse en contacto con su departamento de compras para obtener más información.
El producto original ya no está disponible. Su sustituto se muestra a continuación.
El producto(s) marcados con este símbolo están descatalogados - se venden hasta acabar stock. Pueden encontrar alternativas buscando con el número de catálogo VWR listado arriba. Si necesita más ayuda, por favor llame al Servicio de atención al cliente de VWR al 902.222.897.
65 - 80 of 125 287
no targeter for Bottom