Esta buscando: LABCONCO

Proveedor: LABCONCO

Descripción: Fast-Freeze® flasks for FreeZone® freeze dry systems are designed to be easier to handle, faster to load, and more convenient to use in the laboratory for freeze drying.

Proveedor: LABCONCO

Descripción: Basic Laboratory Hoods are designed specifically for laboratories, classrooms and light duty applications where safe ventilation is required. Constructed of epoxy-coated steel, Basic Hoods are economical and have a smaller overall height and depth than traditional hoods so they fit in areas with low ceilings or narrow aisles.

Proveedor: LABCONCO

Descripción: Oval cupsink, PP, 1,5” NPSM thread, mounts in work surface with cupsink cutout, 76×152 mm

Proveedor: LABCONCO

Descripción: Combine the separate concentrator and cold trap components into one space-saving console and include casters for portability from laboratory to laboratory. A 12 to 17 mm rotor and solvent trap are also included. The interior can accommodate a vacuum pump - the only additional component necessary to begin processing.

Numero del catalogo: (535-0391)

Proveedor: LABCONCO

Descripción: Colector de 8 puertos, An×F×Al: 218×218×399 mm

UOM: 1 * 1 UN

Promoción

Proveedor: LABCONCO

Descripción: Scroll Vacuum Pumps are low maintenence, corrosion resistent pumps that require no oil.

Proveedor: LABCONCO

Descripción: Purifier Logic+ Class II Type A2 Biosafety Cabinets are suitable for work with agents that require Biosafety Level 1, 2 or 3 containment.

Proveedor: LABCONCO

Descripción: Weathercaps are constructed of strong, corrosion-resistant PVC.

Proveedor: LABCONCO

Descripción: Protector premier hoods are suitable for general chemistry applications and also explosion-proof models are available for laboratories with potentially explosive/flammable atmospheres. Hoods are available with a built-in standard fiberglass blower, or an explosion-proof fiberglass blower, or without a blower (remote blower sold separately).

Proveedor: LABCONCO

Descripción: This combination glove box with fibreglass lining provides inlet and outlet HEPA or ULPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials and perform work with contamination-sensitive materials under vacuum or in an inert environment.

Numero del catalogo: (535-0107)

Proveedor: LABCONCO

Descripción: The CentriVap micro IR vacuum concentrator has a very small footprint and therefore fits in tight spaces. It is ideal for small samples such as DNA and small throughput in molecular biology, proteomics, genomics, genetics, cell biology and drug discovery labs.

UOM: 1 * 1 UN

Promoción

Numero del catalogo: (LBCP8025000)

Proveedor: LABCONCO

Descripción: Safely transports heavy instruments and bulky equipment. Holds up to 181 kg. Welded frame is constructed of rugged, 18-gauge glacier white epoxy-coated 2,5 cm square tubular steel.

UOM: 1 * 1 UN

Promoción

Proveedor: LABCONCO

Descripción: These systems use vacuum along with heat and vortex motion to help speed evaporation and provide an alternative to traditional centrifugal evaporation methods. The systems may be used with a broad range of aggressive chemicals. Heat is supplied by a dry block heating system that, unlike water baths, adds no potential source of contamination and requires no maintenance.

Numero del catalogo: (LBCP7522700)

Proveedor: LABCONCO

Descripción: Benchtop freeze drying system, type 304 stainless steel with 12 ports, -75 °C. Ideal for the laboratory with occasional lyophilisation requirements, the Dry Ice Benchtop Freeze Dry System provides a simple, economical means of freeze-drying. It is equipped with a center well for dry ice and solvent that serves as a water vapour collector and doubles as a convenient pre-freezing bath. Flasks, serum bottles and ampules may be frozen by dipping and rotating them in the well. Chamber size 248 x222 mm

UOM: 1 * 1 UN

Promoción

Proveedor: LABCONCO

Descripción: Evaporator, centrifugal, Borosilicate glass tube with end point volume 1,5 ml

Proveedor: LABCONCO

Descripción: Un eficaz sistema de evaporación automática puede utilizarse en una amplia gama de productos químicos agresivos. En los sistemas RapidVap N₂, una corriente de nitrógeno o gas seco va directa hacia abajo hasta la superficie de la muestra. El soplado de nitrógeno reduce la presión parcial directamente sobre el líquido para acelerar la evaporación y eliminar el disolvente mientras se evapora. Se puede programar el nitrógeno para 2, 4, 6 o las 8 posiciones de los tubos. También puede aplicarse el movimiento de vórtice y el calor seco para acelerar el proceso.