Esta buscando: Sartorius

Proveedor: Sartorius

Descripción: Minisart® RC with hydrophilic regenerated cellulose (RC) is optimised for aqueous liquids and solvents with a pH of 3 - 14 and is stable against DMSO. With a pore size of 0,2 µm that can be used for sample preparation and sterile filtration.

Certificados

Proveedor: Sartorius

Descripción: Cellulose nitrate hydrophilic, gridded membrane filters for colony counting, particle testing and microscopy, with outstanding recovery rates for microorganisms.

Certificados

Proveedor: Sartorius

Descripción: PES membrane filters are hydrophilic, have high flow rates thanks to the symmetric structure, have a low non-specific protein adsorption and are chemically resistant over a pH range of 1 to 14. They are recommended for the filtration of aqueous solutions as well for the protein filtration. Furthermore, the low level of extractables makes them suitable for environmental analysis.

Proveedor: Sartorius

Descripción: Minisart® NY with hydrophilic polyamide (nylon) is optimised for aqueous liquids and solvents with a pH of 3 to 14. Type 17845 with a pore size of 0,2 µm can be used for sample preparation and sterile filtration. It has a male Luer slip outlet and version ACK is individually packed and sterilised by ethylene oxide (EO).

Certificados

Numero del catalogo: (516-0156)

Proveedor: Sartorius

Descripción: Los filtros Vivaclear son dispositivos de microfiltrado desechables para clarificación/filtración rápida y fiable de muestras biológicas en el rango de100 a 500 µl. Se pueden usar en rotores de ángulo fijo para tubos de centrífuga de 2,2 ml.

UOM: 1 * 100 UN

Promoción

Proveedor: Sartorius

Descripción: Minisart® PES with polyethersulfone (PES) is optimal for highest flow rates and a pH of 2 - 13. Type 1776D with a pore size of 0,22 µm can be used for sterile filtration and has a male Luer slip outlet. Version ACK is individually packed and sterilised by ethylene oxide (EO).

Proveedor: Sartorius

Descripción: Minisart® NML with surfactant-free cellulose acetate (SFCA) is the best choice for all aqueous solutions and oils with a pH of 4 - 8. With a pore size of 0,2 µm that can be used for sterile filtration and has a male luer lock outlet. Only available in the EU/EEA and registered countries

Certificados

Proveedor: Sartorius

Descripción: Minisart® HY with chemically inert hydrophobic PTFE is suitable for venting as well as filtration of gases and oils with a pH of 3 - 12. With a pore size of 0,2 µm that can be used for sterile filtration. It has a male luer lock outlet and version HYK is individually packed and sterilised by ethylene oxide (EO). Only available in the EU/EEA and registered countries.

Certificados

Proveedor: Sartorius

Descripción: These sterile cellulose nitrate and PES Microsart® e.motion membrane filters can be used for colony counting, particle testing and microscopy. They are specifically designed for use in the Microsart® e.motion dispenser.

Certificados

Proveedor: Sartorius

Descripción: Filtros de membrana hidrófila de acetato de celulosa. Ideal para análisis biológicos y clínicos, pruebas de esterilidad y mediciones de centelleo. Muy baja capacidad de unión a proteínas, adecuado para medios acuosos, alcohólicos y gases calientes.

Proveedor: Sartorius

Descripción: Glass base

Proveedor: Sartorius

Descripción: PTFE flat gasket

Proveedor: Sartorius

Descripción: Embudos de plástico estériles desechables, para el recuento de colonias y partículas.  Para uso con discos de medio de cultivo y membranas Sartorius.

Certificados

Proveedor: Sartorius

Descripción: These bottle-top filters and vacuum filtration units are single-use units for the sterile filtration of samples.

Certificados

Numero del catalogo: (181-0589)

Proveedor: Sartorius

Descripción: The Microsart® e.jet is a laboratory vacuum pump which creates vacuum and concomitantly transfers the filtered liquid to waste.

UOM: 1 * 1 UN

Promoción

Proveedor: Sartorius

Descripción: These filter units with PP funnel and base and cellulose nitrate membrane are developed for the detection and enumeration of microorganisms in pharmaceuticals, cosmetics, food, beverages, water and other liquids. All components of the filtration system must comply with international guidelines, such as USP, EP or ISO standards.