Esta buscando: Termobloques

Numero del catalogo: (453-0086)

Proveedor: SUMINISTROS GRUPO ESPER S L

Descripción: Calentador de bloque, bloques, Aluminio, Bloque para 18 tubos Ø 16 mm

UOM: 1 * 1 UN

Promoción

Proveedor: Cole-Parmer

Descripción: Choose a heater, then blocks to suit your application needs!

Numero del catalogo: (ORIOCOD165)

Proveedor: Thermo Orion

Descripción: Conduct environmental and wastewater monitoring with the Thermo Scientific™ Orion™ AQUAfast COD165 Thermoreactor. The COD165 thermoreactor is equipped with an automatic voltage selector for voltages between 90 and 260 V with a frequency of 50 or 60 Hz. Select from five preset work temperatures of 100, 120, 150, 160, 165 °C and four preset run times of 30, 60, 120 minutes or continuous time. Simply place 16 mm round sample tubes into the digestor wells, cover with the hinged safety shield, set the temperature and time and let samples digest.

UOM: 1 * 1 UN

Promoción

Numero del catalogo: (TECN36620-17)

Proveedor: Cole-Parmer

Descripción: Safely maintain biological samples.

UOM: 1 * 1 UN

Promoción

Proveedor: ASYNT

Descripción: La gama de bloques calefactores DrySyn es la alternativa a los baños de aceite y capas calefactoras. El sistema ofrece síntesis limpias y seguras para reacciones únicas o múltiples.

Proveedor: LABCONCO

Descripción: All RapidVap® Vertex™ Dry Block evaporators require a Block (not included). Blocks of solid aluminum include stainless steel handles to lift the block in and out of the evaporator. A 0,21" (0,5 cm) diameter port in the upper left hand corner of the block is provided for insertion of the temperature probe to monitor upper block temperature.

Proveedor: SELECTA

Descripción: Reflux method thermoreactor for the determination of Chemical Demand Oxygen "COD" in wastewater.

Numero del catalogo: (HACHLTV073)

Proveedor: Hach

Descripción: Block heater/cooler, Hach®, LT 20, Thermostatic block heater, bench-top, 80 % relative humidity, non-condensing, Rango de temperatura: 10...30 °C

UOM: 1 * 1 UN

Promoción

Numero del catalogo: (ASYNADS2-2)

Proveedor: ASYNT

Descripción: The DrySyn® MAXI 2 L is a stand-alone 2000 ml version of the standard DrySyn MAXI Kit (which alternatively has a 3000 ml base and 2000 ml insert) which comes with heat resistant safety lifting handles.

UOM: 1 * 1 UN

Promoción

Proveedor: Hach

Descripción: Digital block heaters which can hold one or two heating blocks, units allow cuvettes and reaction vessels to be digested at identical or different temperatures and time settings. Heating blocks enable cuvettes and reaction vessels to be digested at identical or different temperatures and time settings.

Proveedor: ASYNT

Descripción: Para la refrigeración controlada de matraces de 25 a 1.000 ml sin usar recipientes de reacción con revestimiento. Las unidades permiten el control activo de la temperatura desde 150 a −30 °C (dependiendo de las especificaciones del circulador).

Proveedor: Hach

Descripción: A digestion step often has to be carried out before key parameters can be determined. For these parameters, the LT 200 thermostat complements the LANGE cuvette test system. Two separately controllable heating blocks enable cuvettes and reaction vessels to be digested at identical or different temperatures and time settings. The LT 200 has a digital timer with an automatic switch-off and acoustic signal. Two transparent splash protection lids cover the thermostat while it is heating. The integrated over-temperature feature and the insulated external casing provide additional safety.

Proveedor: JENCONS SCIENTIFIC

Descripción: Interchangeable blocks are made of high grade, non porous, anodised aluminium. Except the blocks used for plates and slides, all other blocks include positions for a block lifter and calibration thermometer.